The throttle connects to channel (3)
The auxiliary connects to GEAR channel (5)
Adjustable Travel Volume [ATV]
Setup the throttle with the ATV range as close to +/- 100% as possible.
Select channel 5 (GEAR) and set the [ATV] to R/U 100% and L/D 100%.
The system is now ready for
calibration. Calibration Procedure
For ThrottleMax Calibration, exit at High Stick(Yellow LED)for Limiter mode and Low stick for governor mode(Green LED)
The target rotor speed can be calculated using the ATV Calculator
Example: Two position switch, two speeds.
Select the [ATV] Menu
Select Channel 5
With the GEAR CH.5 switch down (R/U), set the ATV to 29 (1200rpm @ 9.3)
With the GEAR CH.5 switch up (L/D), set the ATV to 53 (1500rpm @ 9.3)
GEAR CH.5 Switch Rotor RPM